https://priors.trade/updates Every Priors release, newest first: the app, contracts, x402 services, SDK and packages, security. en https://priors.trade/updates#score-v2-weights-2-0-3 https://priors.trade/updates#score-v2-weights-2-0-3 score From 2026-11-02 00:00 UTC, Score v2 is computed with weights 2.0.3, in place of the 2.0.2 announced for 2026-11-01. 2.0.3 keeps 2.0.2's rule for SeatVaultV5 lines and adds two things. A repayment made within 24 hours after a loan's due time counts as on time. And a loan on an Ethos line counts from the line's first day, as one on a treasury line does. The pool counts a loan toward the record once it has been held 7 days, so a 7-day loan only counts when it is repaid at or after its due time, and until now any repayment after that second was late. Held time still stops at the due time, so the 24 hours add no points of their own. No score goes down: on today's record, 16 repayments move from late to on time, and 9 agents are left with none late. https://priors.trade/updates#go-sponsorship-limit https://priors.trade/updates#go-sponsorship-limit app Priors pays the gas for what you do in Go mode, within limits for each account. When one of those limits turns an action down, Go mode now says so in plain words: nothing was sent, and trying again won't help until Priors raises the limit. Repay on time repays a loan only up to its limit per loan. A loan that owes more now shows as one it won't repay, with what to do: raise the limit, or repay it by hand before it's due. The Start page gives the limit: the line and its fee for each loan, $25 at most for now. https://priors.trade/updates#facilitator-approved-sellers https://priors.trade/updates#facilitator-approved-sellers x402 On the Priors x402 facilitator, a seller Priors approved now has its 20 free settles a day outside the budget the self-registered sellers share, so traffic between new sellers can't use up its day. An approved seller also stays registered while it waits for its first sale, where a seller with no sale 14 days after registering is removed. The facilitator now accepts a payment from a payer whose clock runs up to a minute ahead of its own. And the check of a seller's 402 passes only an offer the facilitator can settle: USDG's own EIP-3009 transfer, for 0.01 USDG or more. https://priors.trade/updates#discord-bot-answers https://priors.trade/updates#discord-bot-answers app score Mention the Priors bot in the Priors Discord, reply to it or use /ask, and it answers questions on Priors Score v2, credit lines, seller listings and what just shipped, from public pages only (the public repository's docs, the agent skill, Go mode's own words) and from live public data: the record and Score v2 of an agent the question names, a seller's listing on the facilitator, and this log. A request only a person at Priors can act on, such as a listing's approval, gets what the step checks and where it stands, never an approval or a date, and is passed on, with a link to it. https://priors.trade/updates#agent-reach-it https://priors.trade/updates#agent-reach-it app api An agent's page on priors.trade now shows, under its figures, how to reach it, from what its ERC-8004 registration file declares: Pays to, its payment wallet in the registry, read on chain; Sells over x402, what each endpoint it declares asked at its last check and who it pays; and its website, with "Not an endorsement". When an offer asks USDG on Robinhood Chain and pays the registry wallet, a brief to copy says how to pay it from your agent's line. The page also opens for any ERC-8004 identity on Robinhood Chain with no Priors record yet: its name, its owner and when it registered, never zeros for a record it does not have. https://priors.trade/updates#agent-id-first-line https://priors.trade/updates#agent-id-first-line app The home page has a field for an ERC-8004 agent's id, which opens that identity's page on priors.trade. For an identity with no Priors record yet, the page lists the routes to a first line, each open now, closed and why, or not known, with its one next step; a route shows as open now only where its owner can take it from that page. Such a page shows no Share panel and no badge, as there is no record to share yet. https://priors.trade/updates#mcp-agent-page https://priors.trade/updates#mcp-agent-page mcp The hosted MCP has two more read-only tools. agent_page shows any ERC-8004 identity on Robinhood Chain, with or without a Priors record: its owner, its record when it has one, the wallet it is paid at in the registry and the x402 offers its registration file declares, with the brief to pay one from a line when its 402 pays that wallet in USDG. find_agents lists the identities that sell over x402, ordered by record, then id, never by origin, owner or what they ask. find_sellers and agents_for_hire also list agents' own x402 offers under the same rule: in USDG on Robinhood Chain, paid to the declaring identity's registry wallet. https://priors.trade/updates#mcp-0-11-0 https://priors.trade/updates#mcp-0-11-0 mcp sdk @priors/mcp 0.11.0 has a join tool: with PRIORS_JOIN=on in its environment, it registers an ERC-8004 identity for the agent's own key, with no clone of the repository, and sends nothing when the key already holds one. The hosted MCP's how_to_connect now hands out 0.11.0 and gives the exact line for four agent frameworks: the AI SDK, LangChain, Mastra and the OpenAI Agents SDK. find_services lists only the merchants Go mode's Tools tab lists. https://priors.trade/updates#olas-marketplace-live https://priors.trade/updates#olas-marketplace-live api Priors runs a mech on the Olas Mech Marketplace on Robinhood Chain. An agent sends a request with 0.05 USDG through the marketplace and gets back, from Priors' public reads, an agent's record (priors_record) or its routes to a first line (priors_line_routes), delivered on chain with the answer on IPFS, as Olas' own client reads it. The first live request was answered in 20 seconds. https://priors.trade/updates#go-automations https://priors.trade/updates#go-automations app Go mode has a tab of its own for Automations, right after agent001. A flow is a row of boxes, each one something Priors already runs while you are away: Trade by rules' scheduled buys, take profits and stop losses, and Repay on time. Start from a template (Buy a little every week, Take profit, Stop loss, Buy and protect, Never miss a repayment) or from an empty canvas, and click any box to read what it does with an example. Turn on shows the review with the key's limits, and nothing is sent until you approve that card. https://priors.trade/updates#ask-bigger-line https://priors.trade/updates#ask-bigger-line app api An agent's owner can now ask backers for a bigger line from where the agent already is. In Go mode, Ask for a bigger line is among the agent's actions and your account signs the request. On the agent's page, Owner actions has it for the wallet that owns the agent. The request names the line, the most premium it would pay, the term and how long it stands, and goes to the public line board. It sends nothing on chain and moves no money. https://priors.trade/updates#answer-line-request https://priors.trade/updates#answer-line-request app api An agent with an open request on the line board now shows it on its page, under its figures: the line it asks for, each offer with its root and that root's record, in the order the offers came, and "Not an endorsement". A root's owner connects its wallet there to offer a line, and sends the vouch from that same wallet once the agent's owner has taken the offer. In Go mode, Agents can keep only the agents asking for a line, and your own agent's request lists its offers, each taken by signing the pool's consent for that root. https://priors.trade/updates#agent-next-tier https://priors.trade/updates#agent-next-tier app score Under Priors Score v2, an agent's page now says what its next tier takes, each condition as have / need, in the words the board and Go mode use. For a line from the treasury, it shows the $25 raise on treasury v5, with its three conditions and the next step. When the agent's owner is a Go mode account, Owner actions send it to Go mode, where that account acts, instead of offering Connect wallet. https://priors.trade/updates#ethos-start-before-signin https://priors.trade/updates#ethos-start-before-signin app The 25 USDG first line for owners credible on Ethos, with no bond and no invite, is now named before sign-in: under the home page's Get a first line card, as a fourth way on the Seats page, and on Start before you sign in. Each shows only while the Ethos lane says it can open a line, and goes away when it can't. https://priors.trade/updates#agent-skill-site https://priors.trade/updates#agent-skill-site mcp priors.trade now serves its agent skill at the root of the site: the Markdown file an agent runtime (OpenClaw, Claude Code, Codex, Hermes) reads to learn how to use Priors, how to connect, check a counterparty, get a first line, borrow and repay, with the lines for the AI SDK, LangChain JS, Mastra and the OpenAI Agents SDK. A short index beside it, in the llms-txt convention, points to the skill first. https://priors.trade/updates#line-options-data-api https://priors.trade/updates#line-options-data-api api The reading the hosted MCP's line_options gives for any ERC-8004 identity on Robinhood Chain, each way to a line as open now, closed and why, or not known, with its next step, is now also answered by priors.trade's own data API, from the same computation, as JSON. It is read-only, and every other answer of the API is as before. https://priors.trade/updates#stock-vault-tape-start https://priors.trade/updates#stock-vault-tape-start stocks contracts security Every upgrade of the stock vault starts each token's tape again, at its feed's first round of the last 20 days, found by a search over the feed's rounds. PT-USDG's feed keeps only its latest 1,024 rounds, and once past round 2,048 the search would have read a dropped round as recent and gone down to round 1, taken as a feed begun just now. The new tape would then have held new credit on PT-USDG for about 14 days with nothing moved, and a default in that window would have seized the whole deposit. The search now counts a round it cannot read as old first, so the tape starts at the right round. PT-USDG's feed is at round 415, so this could not happen yet. https://priors.trade/updates#acp-provider https://priors.trade/updates#acp-provider api Priors is a provider on Virtuals' Agent Commerce Protocol, on Robinhood Chain and on Base. Any ACP agent can buy two jobs from the agent "Priors": priors_credit_check (0.03), whether an ERC-8004 agent or an address repaid, defaulted or is clean, from Priors' public reads; and priors_line_routes (0.01), an agent's record, its current line and the ways it can get a first line. Each job is paid into ACP's escrow, in USDG on Robinhood Chain or USDC on Base, and delivered as JSON within minutes, with no click on Priors' side. https://priors.trade/updates#score-v2-weights-2-0-2 https://priors.trade/updates#score-v2-weights-2-0-2 score From 2026-11-01 00:00 UTC, Score v2 is computed with weights 2.0.2 in place of 2.0.1. One thing changes: a line from SeatVaultV5, which an agent's owner backs with their own $PRIORS, counts as the owner's own collateral, as a stock line does. Its loans are no risk someone else took, so the line and its loans add nothing to the score, and a bigger stake never raises it. No weight changes, and no score moves on the day: under 2.0.1, V5's root would only have counted as a backer from 2026-11-10, once 30 days old. https://priors.trade/updates#score-v2-income-index https://priors.trade/updates#score-v2-income-index score Score v2 counts a new payer's x402 payments only once it has read what the agent's side sent that payer, so that money sent back is not counted. Since 2026-10-11 that read had not run: each refresh of the income index gave its time to reading new wallets' past payments first, and they took all of it. So every agent showed no receipts and no income, whatever it had been paid. The read now comes first, the payers and wallets still waiting are read together in one pass each, and each refresh goes on where the last one stopped. The figures come back over the next hours, as the backlog clears. The rules and weights are unchanged. https://priors.trade/updates#facilitator-free-budget https://priors.trade/updates#facilitator-free-budget x402 Self-registered merchants on the Priors x402 facilitator share one free budget of settles a day, which bounds the gas its key spends for them. It is now 100 settles a day for all of them together, down from 300: a settle costs about 103,000 gas, and the free tier's busiest day so far used 40. Each merchant keeps its own 20 free settles a day inside that budget, and approved merchants sit outside it. The budget is published on the facilitator's /health. https://priors.trade/updates#discord-links https://priors.trade/updates#discord-links app priors.trade/links now has a card for the Priors Discord, right after X. In the server, the Priors bot pulls up any agent's record from its number, and each release is posted in #dev-log as it goes live. https://priors.trade/updates#listed-sellers-jobs https://priors.trade/updates#listed-sellers-jobs mcp x402 api The hosted MCP's find_services and the hub's directory at x402.priors.trade now list sellers the way Go mode's Tools does: the ones Priors approved, and the ones under review whose own endpoint passed the facilitator's 402 check (USDG on Robinhood Chain, paid to their own address), marked under review. Hidden or unchecked sellers no longer show, and none of their words reaches an agent. Jobs that sellers add on their own tools now reach agents too once Priors approves the job and its seller: find_jobs lists them under From sellers, beside Priors' catalogue, and priors.trade/api/jobs carries them as sellerJobs. https://priors.trade/updates#mcp-0-10-2 https://priors.trade/updates#mcp-0-10-2 mcp sdk security The pool lets an agent's owner name any address its delegate, without that address agreeing. So a buyer of an agent you once held, or whose key you were, could name your wallet its delegate, borrow, and have your repay pay the buyer's loan from your USDG and your savings. Now @priors/mcp, @priors/x402 and the SDK borrow and repay only for a wallet that is the agent's owner or its declared ERC-8004 wallet, which only that wallet's own signature sets and a transfer clears. They refuse anything else before a read, a signature or a transaction. Borrowing takes the same rule as repaying, so no client borrows a loan it would then refuse to repay. https://priors.trade/updates#credit-reader-anchors https://priors.trade/updates#credit-reader-anchors mcp sdk security A full check of an agent's ERC-8004 credit statements with Priors' manifest now fails a chain whose statements close loans but carry no anchor and no default entry: nothing else ties the token and decimals a writer declares to the token the pools moved. A default entry's source is also held to the manifest's events and fields, as a statement's is, so it cannot cite a repayment or read another parameter as its amount. Both needed a writer's key. Every statement Priors' writer has posted reads the same as before. https://priors.trade/updates#line-board-contract-owners https://priors.trade/updates#line-board-contract-owners api The line board now takes a request, an offer or an acceptance signed by an owner that is a contract, as Go mode's smart accounts are. The board puts such a signature to the owner's own isValidSignature (ERC-1271) with the message's EIP-712 hash, and takes it only when the contract answers ERC-1271's magic value. An owner that is a plain wallet signs as before, with its own ECDSA signature. https://priors.trade/updates#mcp-0-10-1 https://priors.trade/updates#mcp-0-10-1 mcp sdk @priors/mcp now carries AutoRepay v2's address, so autopay_on turns on a plan for the agent's wallet with no PRIORS_AUTOREPAY. It came in 0.10.0, on npm at 07:56 UTC, and 0.10.1 followed at 08:49: since 0.10.0, pay_url could time out for a wallet with no PRIORS_AGENT_ID. npm marks 0.10.0 deprecated, so use 0.10.1. Both run on @priors/x402 0.8.0. https://priors.trade/updates#line-board-limit https://priors.trade/updates#line-board-limit api security The line board now takes at most 10 signed messages in any 60 seconds from one IP address, and the count is exact. The limit it launched with on 21 October was approximate, counted separately in each Cloudflare location, and let a steady stream from one address through. Each address now has a counter of its own, asked before a message is read. https://priors.trade/updates#line-board https://priors.trade/updates#line-board mcp An agent's owner can now ask for a bigger line in public, and anyone who runs a root on pool v2 can offer to back it. The owner signs a request: the line, the most premium it takes, the term and how long the request stays open. A root's owner answers with a signed offer. The agent's owner accepts one offer by signing the pool's own consent for that root, and the root's owner sends the vouch from its own wallet. Every step is a signature checked against the chain. Priors keeps the messages and signs and sends nothing. https://priors.trade/updates#mcp-line-options https://priors.trade/updates#mcp-line-options mcp The hosted MCP has two new read-only tools. line_options takes any ERC-8004 identity on Robinhood Chain, with or without a Priors record, and goes through each way to a line: the treasury's first line by invite, the Ethos lane, a stock line, and a line on its owner's own $PRIORS. For each one it says open now, closed and why, or not known, how big the line would be, and the next step. priors_line_quote says how much of the owner's $PRIORS a SeatVaultV5 line of a given size takes, what the owner holds and what is missing, and links the Go mode page where the owner opens it. Neither moves money or touches a score. https://priors.trade/updates#draft-standards https://priors.trade/updates#draft-standards contracts The parts of Priors that another lender, a wallet or a reader would need are now written up as ten draft ERCs, each with a reference implementation and tests in a public repository. They cover credit history for ERC-8004 agents, one interface for agent credit lines, a shared registry of defaults, third parties that back a lender's line and an agent's income statements, among others. Each is discussed on Ethereum Magicians. None is submitted to ethereum/ERCs yet, and the ERC editors give each its number when it is. https://priors.trade/updates#repay-on-time https://priors.trade/updates#repay-on-time app contracts Go mode can now repay an agent's loans for you. Turn on Repay on time when you create an agent on the Start page, or later in Automations on the agent001 tab. Each loan you take for that agent in Go mode is then repaid from your account in the 6 hours before it is due, while the account holds enough, with no click per loan. Loans the agent's own key takes are never paid from your account. It makes an on-time repayment more likely; it is not a promise. https://priors.trade/updates#ethos-lane https://priors.trade/updates#ethos-lane app A new agent whose owner shows an Ethos score of 1400 or more can now start with a 25 USDG line instead of the treasury's 5, with no bond and no invite. On Go mode's Start page, choose "Credible on Ethos (1400+)? Start with a $25 line", connect the wallet your Ethos profile uses and create the agent. That wallet signs one message to show the score is yours, with no transaction and no gas. The line comes from the Ethos root, agent #8823, out of its own stake. https://priors.trade/updates#trade-by-rules https://priors.trade/updates#trade-by-rules app stocks Automations on Go mode's agent001 tab now has Trade by rules. Set a scheduled buy of a stock token with USDG, from every 6 hours to every week, with a take profit and a stop loss, and approve a trading key once, with limits you choose up to 10 USDG a trade and 50 USDG in all, for 7, 14 or 31 days. Priors' executor runs your rules every 10 minutes and trades on Uniswap, and Priors pays the gas. Pause stops it, and Turn off drops the key at Priors and removes it from your account. https://priors.trade/updates#priors-ai-loan https://priors.trade/updates#priors-ai-loan app Priors AI's credit can now come from a loan. In the agent001 tab's settings, Borrow for credit takes one of your agents' lines or stock lines and an amount, then two approval cards follow: the first borrows to your account, the second adds it to Priors AI as credit. The loan is repaid in full by its due date like any other, and its repayment counts on that agent's record. Unused credit stays as credit. https://priors.trade/updates#go-sellers https://priors.trade/updates#go-sellers app x402 Go mode's Tools now also shows APIs listed with Priors and not reviewed yet, once their own address answers 402 in USDG on Robinhood Chain, paid to the address they registered. They are marked Under review, and your agent pays one only if you let it, at most 1 USDG a use. In Sell your API, a listed API shows its review and can add up to 5 jobs that other agents can hire it for. They show in Jobs, under From sellers, marked Under review until Priors approves them. https://priors.trade/updates#mcp-jobs-sellers https://priors.trade/updates#mcp-jobs-sellers mcp x402 api The hosted MCP has three more tools. find_jobs lists the jobs of Go mode's Jobs that any agent can do for a client and sell: what the client gets, the paid tools each one uses, what a run costs, the loan that covers it if the wallet is short, and whether it is Live now or Coming next. job_brief gives one live job's brief for the agent's AI. find_sellers lists what an agent's line can pay over x402 in USDG on Robinhood Chain, under one rule for every seller. https://priors.trade/updates#agent-owners https://priors.trade/updates#agent-owners app score api Each agent's page on priors.trade now has an Owners panel: every owner from the ERC-8004 registry's transfers, with their dates and whether they registered the agent or it changed hands, and the owner line says since when. It tells the loans repaid with this owner apart from every owner's. A new line under the agent's four figures shows what customers paid it in the last 30 days and how many paid, counting payments to the wallet it declared, its own wallets left out. https://priors.trade/updates#earned-since-saved https://priors.trade/updates#earned-since-saved app Go mode's Savings now shows Earned since you saved next to Saved: what your USDG in the Steakhouse USDG vault on Morpho earned since the save that began your current savings. It comes from the vault's own records: what your savings are worth now, plus what you withdrew, less what you saved. It moves with Morpho's variable rate, and a loss in the vault lowers it. https://priors.trade/updates#add-another-network https://priors.trade/updates#add-another-network app Go mode's Add USDG now has From another network, beside From Base. Send USDC from your own wallet on Ethereum, Arbitrum, Optimism, Polygon, Avalanche, Linea, Unichain, World Chain, Ink, HyperEVM, Monad or Arc: Across converts it, and it arrives in your account as USDG, usually within seconds. Your wallet asks you to approve the amount for Across, then to send it, and you pay that network's gas. https://priors.trade/updates#pt-usdg-backing https://priors.trade/updates#pt-usdg-backing stocks contracts Pendle's PT-USDG now backs a line the way a stock token does. An agent's owner deposits it in the stock vault, and the vault lends USDG against 60% of its value, with one 1,000 USDG cap across all PT-USDG lines. New PT-USDG credit opened by itself at 17:37:53 UTC, once its feed had 14 days of rounds; nothing was signed for it that day. https://priors.trade/updates#stock-vault-tape-behind https://priors.trade/updates#stock-vault-tape-behind stocks contracts security When a stock token's tape was more than 6 rounds behind its feed, the vault treated it as a lending hold, and a default on a lending hold seizes every token of the position. So a default marked, repaid into or settled while the tape lagged took the depositor's whole deposit, where it should take what is owed plus 20% and return the rest. Now a tape behind is a reason of its own: the seizure waits, the whole deposit with it, until anyone records the tape, and then settle takes only its share. https://priors.trade/updates#one-look https://priors.trade/updates#one-look app The design Jobs was built in now covers Go mode, the account pages and the public pages, in light and dark. Every list you pick from, like a loan's term, an agent or Jobs' Sort, opens our own dropdown instead of the browser's, and the language list takes the same look. In Go mode, Jobs is its own item in the sidebar, right under Tools, and Tools keeps Use tools and Sell your API. https://priors.trade/updates#builder-ai-chat https://priors.trade/updates#builder-ai-chat app mcp Builder mode's chat page is now on priors.trade/chat. Connect the AI you use, through OpenRouter's sign-in or an Anthropic or OpenAI key that stays in your browser, and the wallet that owns your agent. Your AI reads Priors and prepares borrows and repayments, and your wallet signs each one after you press Confirm on it. https://priors.trade/updates#go-jobs https://priors.trade/updates#go-jobs app x402 Go mode's Tools now has Jobs: 50 paid jobs in 8 kinds, from checking agents before a deal to a daily pool brief. Each one shows the tools it pays for and what each costs, the loan it needs and what you keep of what the client pays. The agent borrows on its line, pays each tool per use from its own wallet, gets paid through its own API and repays. The jobs it can run today are marked Live now, and the rest read Coming next. https://priors.trade/updates#account-profile https://priors.trade/updates#account-profile app The account menu now opens your profile: your tree, your total in dollars with $PRIORS beside it, a bar of where your money sits, then Holdings, Activity and Agents with their public record. Any address opens the same way from a link, read only: go.priors.trade/account?profile= and the address. Every address is shown the same way. https://priors.trade/updates#next-level https://priors.trade/updates#next-level app score Go mode's agent panel now reads "Next level" and lists each condition with what the agent has and what it needs. On your own agent it also says what moves each one. The score and the level stay as they were: Score v2 now also says where an agent goes next. https://priors.trade/updates#stock-vault-tape https://priors.trade/updates#stock-vault-tape stocks contracts security New credit on a stock token is held when its feed moves more than 25% against any round of the last 14 days. The vault used to compare the latest quote with a sample of past rounds (1, 2, 4 and so on up to 4,096 back), so a round between two samples could go unseen. It now keeps a tape of each UTC day's lowest and highest quote for each feed, and compares the latest quote with every round of the window. https://priors.trade/updates#v5-keeper-sales https://priors.trade/updates#v5-keeper-sales contracts security A private report, rated Low, is about SeatVaultV5, whose libraries are fixed at deployment, so docs/SECURITY-v2.md now describes it and how far it goes (V5-3). V5's keeper sells, for USDG, the $PRIORS of those leaving the vault. Each sale was sized and counted against the day's sell budget at the lower of the pool's spot rate and its 24-hour median, while the pool pays at spot. With spot above the median, a day's sales could pay leavers more USDG than the budget recorded, by about the gap. https://priors.trade/updates#go-life https://priors.trade/updates#go-life app A figure lights once when its value changes, and new activity rows slide in. The Launchpad's done steps draw in, and its mark grows a pixel bonsai tier per step. The stocks dot is live only while a stock's quote is under 15 minutes old, and the pool's dot is green while its figures are fresh. Nothing moves with reduced motion turned on, and no figure moves or lights with balances hidden. https://priors.trade/updates#live-capital https://priors.trade/updates#live-capital app Priors is listed on DefiLlama. The Capital card on priors.trade/live adds two rows on the same perimeters: USDG held by Priors' contracts, which is DefiLlama's TVL, and $PRIORS in the seat vaults, its staking. Loans out count there as borrowed, not as TVL. https://priors.trade/updates#x402-0-8-0 https://priors.trade/updates#x402-0-8-0 x402 sdk @priors/x402 0.8.0, on npm since 18:06 UTC, adds payViaGateway. Most sellers in Vantis' Keyring catalog are paid in USDC on Base. Keyring takes one USDG payment on Robinhood Chain, pays the seller and relays its answer, so an agent's Priors line can cover such a seller with no float on Base. It is off unless createPayer({ gateway }) names it, and was tested against a mock gateway only. https://priors.trade/updates#share-card https://priors.trade/updates#share-card app score Each agent's page on priors.trade now has a Share panel where Badge was. It shows the agent's card, the same picture its link shows on X, then plays its record on it once: its loans repaid climb along a line, day by day, while its tree turns slowly once, and the film ends on the card. Share on X opens a post with the agent's name, its loans repaid, its defaults and its link. Download video saves the film and Download card saves the picture. On a phone the panel comes right after the agent's four figures, and Share video hands the film to the phone's share sheet. Go mode's agent panel has the same Share button, in all five languages. https://priors.trade/updates#docs-today https://priors.trade/updates#docs-today app stocks contracts We checked every page against the chain and the live app, and corrected what had fallen behind. The Protocol page now covers the fair default on stock lines, Score v2, Back agents and the treasury's settings as the contracts have them. Go mode's Guide says stock lines back 25% to 70% of a token's value, and that a default keeps what is owed plus 20% and gives the rest back. The lender, stocks, builder and x402 pages, Go mode's help and agent001's answers say the same facts, in all five languages. https://priors.trade/updates#every-line-backed https://priors.trade/updates#every-line-backed app Every Priors line is backed in USDG by its backer's stake, locked in the pool: the treasury's, a sponsor's or a Priors vault's. A default is paid in full by that backer. The site, Go mode in five languages and the README now say it that way, and the older words for a line with no backing are gone. https://priors.trade/updates#go-buttons https://priors.trade/updates#go-buttons app We went through every screen of Go mode and moved buttons to where your hand already is. Field helpers like Max are as tall as their field. A stock line's three actions sit together. Lend and Savings use one button size. The deposit sheet's Cancel sits beside its main button. On a phone, the main move gets its own line. https://priors.trade/updates#priors-ai-credit https://priors.trade/updates#priors-ai-credit app The Priors AI section in agent001's settings now shows your credit and what today used. The $0.50 trial is one row with Try it, and adding credit is one row: amount, asset, button. agent001's auto top-up is a card of its own, with its setting in an On or Off pill and the monthly cap in dollars. Every answer shows on the section's own line, right under its buttons. https://priors.trade/updates#connect-ai-icons https://priors.trade/updates#connect-ai-icons app x402 The tiles in Connect your AI now show the real mark of each app: Claude and Claude Code, ChatGPT and Codex, Cursor and VS Code, in light and dark. Priors' own report API shows the Priors tree. Every other service keeps its letter. https://priors.trade/updates#mcp-0-9-3 https://priors.trade/updates#mcp-0-9-3 mcp sdk security @priors/mcp 0.9.3, on npm since 16:41 UTC, applies the rule the v2 SDK got the same day for a lost answer (C-13) to its PT-USDG trades. A trade that may have been sent is said to be so, and a buy stays counted against PRIORS_MAX_PT_TOTAL_USD. https://priors.trade/updates#sdk-borrow-lost https://priors.trade/updates#sdk-borrow-lost sdk security A private report, rated Low, found that the v2 SDK's borrow, and so priors-v2 borrow, let a lost answer through as a bare network error once the loan could have been taken. Running borrow again then opened a second loan for one intended borrow, and nothing said the first might exist. The SDK and the CLI are fixed in the public repository since 10:26 UTC. https://priors.trade/updates#pool-deposit-clock https://priors.trade/updates#pool-deposit-clock contracts security A private report, rated Low, is about the pool, which cannot be upgraded, so docs/SECURITY-v2.md now describes it and how far it goes (O-6). A lender's wallet has one clock for all its deposits, and withdraw charges the 0.5% exit fee while that clock is under seven days old. A fresh deposit into a wallet whose older deposits are well past seven days can leave the clock past seven days, so money only seconds old leaves with no fee. It is O-5 the other way round. https://priors.trade/updates#stock-fair-default https://priors.trade/updates#stock-fair-default stocks contracts Until now a default on a stock line kept the whole deposit, however much it was worth. The stock vault now keeps tokens worth what the agent owes (the defaulted loans' principal and fees) plus a 20% buffer, valued at the token's last usable Chainlink quote, and sends the rest back to the depositor. If the token can't be valued that day, or the deposit is worth less, it keeps all of it. A falling stock never sells a deposit. The deposit sheet and the MCP's stock_line_request say the rule in plain words. https://priors.trade/updates#mcp-0-9-2 https://priors.trade/updates#mcp-0-9-2 mcp sdk security Two private reports, each rated Low, are fixed in @priors/mcp 0.9.2, on npm since 17:30 UTC. The hosted MCP has the fence's fix since the same day. Versions up to 0.9.1 were affected by both, and the advisories were published on 14 October. https://priors.trade/updates#mcp-0-9-1 https://priors.trade/updates#mcp-0-9-1 stocks mcp x402 sdk @priors/mcp 0.9.1, on npm since 08:08 UTC, fixes how stock_line_request sizes and checks a request, so its link opens a deposit the vault takes. @priors/x402 0.7.1, on npm since 08:09 UTC and under 0.9.1, no longer passes a payer when the record service's answer holds no record. https://priors.trade/updates#go-open-everyone https://priors.trade/updates#go-open-everyone app Any Google account can now sign in to Go mode. The closed list Go mode opened with on 1 October is over. You still sign in with Google, with nothing to write down, and Priors pays the gas. https://priors.trade/updates#treasury-bond-hold https://priors.trade/updates#treasury-bond-hold contracts security The Safe raised the number of qualified loans the treasury asks for (minQualified) from 3 to 1,000,000, and the bond contract reads the same number. So a bond no longer comes back after 3 qualified loans while the agent's $5 line is still open. That let an owner take the bond back, then draw the line and default without losing anything. The bond now comes back once the agent has no line and no open loan, at least 4 days after it was posted. In Go mode, the owner presses Close line and take the bond back on the agent's card, and the bond arrives by itself within about 30 minutes. https://priors.trade/updates#first-lines-launch-week https://priors.trade/updates#first-lines-launch-week app contracts The treasury's weekly cap of new first lines is $1,000 until 16 October 2026 at 02:16 UTC, then back to $100 a week. 907 USDG of new stake backs them. The raise to $25 stays on hold. https://priors.trade/updates#priors-ai https://priors.trade/updates#priors-ai app If you haven't connected your own model, the agent001 tab now uses Priors AI. Before, a question in your own words needed your own OpenRouter, Anthropic or OpenAI key, and without one only the presets worked. Each question costs what the model costs Priors, plus 20%, paid from Priors AI credit you add in USDG or $PRIORS. If your agent posted its bond or repaid a loan, $0.50 of credit is offered once. It answers only questions about Priors, up to $1 a day per account, and an off-topic question is refused at no cost. https://priors.trade/updates#stock-lines-retier https://priors.trade/updates#stock-lines-retier stocks contracts The Safe retuned the stock vault. A Treasury fund (SGOV) now backs a line at 70% of its value, the code's maximum, and the two index funds at 60%. A split or dividend now holds new credit on that stock for one day instead of fourteen, so SGOV, TSM and ORCL lend again. The two names with the thinnest exits take no new line, and three others share a smaller cap. A record of repaid treasury loans now earns its loan-to-value bonus ten times sooner. https://priors.trade/updates#go-stock-sheet https://priors.trade/updates#go-stock-sheet app stocks On Stock lines, the deposit sheet now asks for the line you need, in dollars, and fills in how much stock to deposit. That is what the line needs at the stock's loan-to-value, times 1.3 for room to fall. If you hold enough for the line but not the extra room, it fills in all you hold. If you hold less than the line needs, it says how much more to buy. The sheet says how much you keep and what borrowing the whole line costs for a day and for a week, in cents. It also says what the vault keeps on a default, read from the live vault. Nothing moves until you press Deposit and open line. https://priors.trade/updates#stock-line-request https://priors.trade/updates#stock-line-request stocks mcp sdk When an agent's line is too small for a task, stock_line_request asks its owner for a line backed by a Robinhood stock token the owner holds. It checks that the stock takes new lines now and that the agent can take one. Then it sizes the deposit, gives the cost in cents for a day and a week, and says what a default would keep. Its answer carries a Go mode link to the owner's deposit sheet, already filled in. It holds no key and sends nothing, so nothing moves until the owner deposits. It is in @priors/mcp 0.9.0 and on mcp.priors.trade. https://priors.trade/updates#x402-0-7-0-check https://priors.trade/updates#x402-0-7-0-check x402 sdk @priors/x402/check checks a payer's Priors record in front of an x402 paywall, whatever runs it. It reads the payer from the payment header. A payer whose agent defaulted gets a 403 before the paywall checks anything, and a request with no payment header goes on to the paywall's 402 as before. The rest of the package is unchanged. https://priors.trade/updates#mcp-0-8-5 https://priors.trade/updates#mcp-0-8-5 mcp sdk security Two private reports, each rated Low, were about the limits an owner sets on what an agent can borrow and spend. Both are fixed in @priors/mcp 0.8.5, on npm since 04:09 UTC and handed out by the hosted MCP from about 04:15 and by the site from about 05:20. 0.9.0, released that evening, includes both fixes. https://priors.trade/updates#desk-ledger https://priors.trade/updates#desk-ledger api mcp priors.trade/api/desks lists every pool root, a backer whose own USDG stake stands behind the lines it vouches for. For each one it gives its age, its stake and the lines it vouches for now. It counts the loans it backed, how many were repaid (and of those, how many qualified or were late), how many are open now, and the defaults marked on chain. Its losses count every loan past its due date and grace that was not repaid, marked on chain or not. The hosted MCP's desk_record gives the same figures. https://priors.trade/updates#copy-badge https://priors.trade/updates#copy-badge app score Each agent's page on priors.trade now shows its live badge, with its score and loans repaid (red after a default), and a Copy badge button. The button puts Markdown on the clipboard: the badge image, linked to the agent's page. Go mode's agent panel has Copy badge too. If the browser blocks the clipboard, the Markdown is selected so you can copy it by hand. https://priors.trade/updates#ladder-clock https://priors.trade/updates#ladder-clock app For an agent with a line on Back agents, Go mode's notifications and agent001 now say when it is one counted loan from its next step. They give that step's ceiling and the date its 14 days on the current step end. In Telegram, send /watch <agent id> to @priors_agents_bot. The chat then gets one message when that agent is one counted loan from its next step, and one when it moves up. The bot checks every half hour. https://priors.trade/updates#timelock-delay-zero https://priors.trade/updates#timelock-delay-zero contracts security The protocol's timelock owns PoolSteward, the engines' settings and the stock vault's upgrade key. Its waiting time is now zero: Priors' Safe, where two of its three owners must sign, still schedules every change in public on chain, and the change can run as soon as it is scheduled. The stocks page and the protocol page say so. https://priors.trade/updates#go-repay-timeline https://priors.trade/updates#go-repay-timeline app On Home's Repay step, each part of the loan's timeline opens a short explanation on hover, focus or tap: before day 7, day 7 (from then a repayment counts as a week-long loan, which builds the agent's record), the best window to repay, the due date, the grace days after it, today and the countdown. Each uses the loan's own dates. https://priors.trade/updates#go-stocks-open https://priors.trade/updates#go-stocks-open app stocks Each row of Home's Stocks card opens Backing with that stock token already picked in the deposit form. When the stock feeds haven't moved for a day (the market is closed), the card says Market closed and shows a dash instead of 0.00%. https://priors.trade/updates#go-back-agents https://priors.trade/updates#go-back-agents app Pick your agent, type an amount of your own $PRIORS, and the line steps from $25 to $500 show the line it opens before anything is sent. What you share (the fees the agent pays, in USDG, nothing promised) and the risk (three quarters of your $PRIORS behind it burns on a missed payment) each take one line. Below, every agent that repays is listed by its record, with search and sorting. Backing stays open to each agent's own owner. https://priors.trade/updates#go-agent001-next https://priors.trade/updates#go-agent001-next app agent001 reads plain requests in English, Spanish, French, Portuguese and Chinese, answers "what next" and "how am I doing" from the account's own records, and drafts each move as a card with one main button. Nothing is sent until you approve it, and a card that may have been sent is never opened again. https://priors.trade/updates#go-errors-plain https://priors.trade/updates#go-errors-plain app security A failed borrow, repayment, transfer, line or backing now answers right under the button you pressed, in plain words: what happened, whether anything was sent, and what to do. Gas refusals and the pool's errors are worded, never shown as codes. A read the network didn't answer is tried again once by itself. https://priors.trade/updates#go-start-safer https://priors.trade/updates#go-start-safer app The Start page keeps you on the agent's key until it is copied, since every loan goes to that key's wallet. It asks for enough USDG to repay the agent's loan, not only the bond. Each agent's card now shows the USDG in the agent's own wallet, where its loans go. https://priors.trade/updates#go-tools-tab https://priors.trade/updates#go-tools-tab app x402 mcp Tools lists what an agent can pay for per use, each with a plain description, what its endpoint actually charges in USDG and how often it was used. Give to my agent copies a ready instruction for your AI. Connect your AI walks through Claude, ChatGPT, Cursor and other apps, says which of them can pay, and keeps setup code behind Show setup code. Sell your API takes three steps. https://priors.trade/updates#go-help-today https://priors.trade/updates#go-help-today app Help and the Guide now explain linking an agent's X account, the daily limits, Add USDG from Base, Back agents and Tools, and what to do when something didn't go through. Go mode links @priors_trade. https://priors.trade/updates#go-consent-pwa https://priors.trade/updates#go-consent-pwa app Every page asks before anything non-essential is collected (accept, reject or manage, reopenable from every footer), and a privacy page says what is collected, why and where it goes. Fonts are served from Priors' own domain. Go mode can be installed on a phone's home screen; it never stores account data, API answers or chain reads on the device. https://priors.trade/updates#go-sidebar-groups https://priors.trade/updates#go-sidebar-groups app Go mode's sidebar keeps Home, Agents, agent001 and History at the top, then two named groups: Earn & back, and Payments. Transfer out moves into the account menu, and New agent leaves the sidebar, since Home's card and the Agents tab both have it. Home's top bar now shows the same figures as every other tab, above the card that takes an account from Add USDG to repaying its agent's loan. https://priors.trade/updates#x-link https://priors.trade/updates#x-link app In Go mode, an agent's owner can link the agent's X account to its record on the ERC-8004 identity registry. The X account posts a line with the agent's number and its link code, and the owner saves that post's address to the agent's record, in one operation whose gas Priors pays. The agent's panel then shows an "@handle · linked" chip while X still shows that post. https://priors.trade/updates#where-it-runs https://priors.trade/updates#where-it-runs app x402 mcp The x402 tab's Use APIs pane has a new section, Where it runs, with blocks to copy for the program an agent runs in: ElizaOS, OpenClaw, Hermes or any MCP app. The recommended way needs no key. The agent connects to the hosted Priors MCP, reads records and asks to borrow or repay, and its owner approves each request in Go mode. With its key, the agent also pays for APIs from its own wallet through @priors/mcp 0.8.0. https://priors.trade/updates#agent001-link-x https://priors.trade/updates#agent001-link-x app "Set up my agent" in the agent001 tab has a new step, Link X, after "Key and connection" and before "Borrow". agent001 takes the handle, gives the line with the link code and X's compose window, and checks the pasted post with X. Then it shows a card, "Save @handle to <name>'s record", and nothing is saved until the owner presses Approve. https://priors.trade/updates#go-link-preview https://priors.trade/updates#go-link-preview app Links to go.priors.trade/account and /start now preview with a new image, 1600 x 900: a voxel tree lit at night with small robots at its roots, the line "you can fake reviews. you can't fake having paid back debt." and a "launch your agent" button beside go.priors.trade. It replaces the older bonsai card on both pages. https://priors.trade/updates#go-home-card https://priors.trade/updates#go-home-card app security Go mode's Home is built around one card with five steps: Add USDG, Create your agent, Borrow, Repay and Grow its record. Borrowing and repaying happen inside the card. A step is marked done only when the chain shows it for the account. The card opens on the step the account is at, with a line that says where it stands, such as "$19.49 in your account", "Up to $5" or "Due in 3 days". https://priors.trade/updates#go-launch-screens https://priors.trade/updates#go-launch-screens app Signed out, go.priors.trade/account opens on a new page: the line "Reviews can be faked. Repaid loans can't.", what Priors is in one sentence, the Google sign-in card, live figures and what you can do. Signed in, Home has a What's new card and the lead agent's tree, a repayment ends with a few pixel leaves rising from the card, and History, Lend and Back agents show loading, empty and error states. On phones, a tab bar sits at the bottom. https://priors.trade/updates#add-from-base https://priors.trade/updates#add-from-base app Go mode can take money from Base. Each account gets one deposit address on Base, made once through Relay (a service that moves tokens between chains) and then kept, so every device shows the same one. USDC sent there on Base arrives as USDG in the account on Robinhood Chain, usually within a minute. Add USDG opens on From Base, with On Robinhood Chain beside it, on the account page, the Start page and Home's card. https://priors.trade/updates#start-checks-line https://priors.trade/updates#start-checks-line app Before Create locks the 5 USDG bond, the Start page now asks the invite service whether a line is open to this account right now. The check covers the day's and the week's limits on new lines, the account's two automatic invites, any invite waiting for it and the backing available. If no line is open, Create stays off and one sentence says why, for example "Today's new lines are taken. Nothing was spent. Come back after 00:00 UTC." https://priors.trade/updates#repay-twenty-a-time https://priors.trade/updates#repay-twenty-a-time app security Go mode's gas gate now counts a repayment apart from the day's other operations, so a day when the gas Priors pays is used up no longer refuses a Repay and lets a loan go late. Repay sends an agent's open loans at most 20 to an operation, in order of due date, so each one counts as a repayment. Before, all of an agent's open loans went in one operation. With 21 or more, the gate counted it as an ordinary one, and with more than 41 it was too large for the gate on any day. https://priors.trade/updates#go-rpc https://priors.trade/updates#go-rpc app Since 7 October, Go mode reads the chain through go.priors.trade/rpc, its own read-only endpoint, and since 18:54 UTC on 9 October that endpoint asks a paid node before the public ones. A page load sends about a hundred reads at once. With 40 reads sent at once, each took about 4.1 s through the public nodes and 0.52 s through the paid node. In a check on 10 October, 40 reads sent at once all answered, with a median of 0.58 s. https://priors.trade/updates#agent001-set-up https://priors.trade/updates#agent001-set-up app "Set up my agent" in the agent001 tab takes an account from nothing to a live agent and its borrow. Every money or chain move is one of agent001's approve or decline cards, and nothing is signed until the owner presses Approve. The run drafts only the steps still to do, and moves on when a step is done by hand elsewhere. https://priors.trade/updates#seatvault-v5 https://priors.trade/updates#seatvault-v5 contracts app SeatVaultV5 is on Robinhood Chain. An agent's owner opens the agent's line by staking the owner's own $PRIORS behind it, and the vault backs the line in USDG from its own identity, #8641. Only the agent's owner can back it. In Go mode the Seats tab is now Back agents, with gas paid by Priors, and SeatVaultV4 takes no new seats. https://priors.trade/updates#reserve-sweep https://priors.trade/updates#reserve-sweep contracts PoolSteward's sweep(), which anyone can call once a day, ran at 17:07 UTC. It sent the 35.465696 USDG above the reserve's 190 USDG target to the RevenueRouter, which split it in half between PriorsLiquidity and BuyAndBack, 17.732848 USDG each. https://priors.trade/updates#immutable-reports https://priors.trade/updates#immutable-reports contracts app security Four private reports, each rated Low, are about contracts that cannot be upgraded, so docs/SECURITY-v2.md now describes each one and how far it can go. One changes what an owner should do. A pool delegate stays tied to the owner who named it, so clear it before you sell or transfer the agent, as the agent page's Delegate box now says. https://priors.trade/updates#help-credit-statements https://priors.trade/updates#help-credit-statements app score Help has a new entry, "What are credit statements?". Priors posts each agent's loan history to the ERC-8004 reputation registry as credit statements: loans repaid on time, repaid late or defaulted on. An agent gets a statement once it has a loan, then a new one at most once a week while it borrows or repays, and each default gets an entry of its own. Any lender or app can read them and check them against the pools' logs. https://priors.trade/updates#packages-0-6-2 https://priors.trade/updates#packages-0-6-2 x402 mcp sdk security Both packages had two releases on 9 October for private reports, each rated Low. The site's setup commands changed with them: they now keep an agent's key in a file only its owner can read and hand the client its path, never the key. https://priors.trade/updates#mcp-0-8-0 https://priors.trade/updates#mcp-0-8-0 mcp sdk security @priors/mcp 0.8.0 is for agents that run without a person at the keyboard, in ElizaOS, OpenClaw, Hermes or their own code. Every change is opt-in, so a 0.7 configuration behaves as before. The site has handed out 0.8.0 since 21:23 UTC. @priors/x402 stays at 0.6.2. https://priors.trade/updates#mcp-privacy https://priors.trade/updates#mcp-privacy mcp mcp.priors.trade now publishes a privacy policy, linked from its home page. The server has no accounts, sign-in or cookies, holds no key and sends no transaction. It keeps nothing in a database. Nothing is sold, shared for advertising or sent to an AI model. https://priors.trade/updates#stock-vault-window https://priors.trade/updates#stock-vault-window stocks contracts security The Safe set the stock vault's lending hold back to its full window. New credit is held again when a token's feed moves more than 25% against any round of the last 14 days, and the wait after a split or a multiplier change stays 14 days. Since 5 October the hold had compared each round only with the one before it, so a split the feed had printed but the token had not marked yet could be lent against at the inflated value. On a fork of the live vault, $100 of CLSK drew a $250 line. https://priors.trade/updates#mcp-0-6-4 https://priors.trade/updates#mcp-0-6-4 mcp sdk security Three releases for private reports about money calls that take long or lose their answer. The worst case, rated Medium, was an MCP client's retry acting a second time: a second buy for one authorised trade, or a second loan. npm now marks 0.6.0 to 0.6.3 deprecated. https://priors.trade/updates#credit-reader-manifest https://priors.trade/updates#credit-reader-manifest score mcp sdk security The ERC-8004 credit reader in the public repository (sdk/credit-reader.mjs, scripts/verify-credit.mjs) and the hosted credit_history tool now count a writer's statements only when the reader's manifest names that writer. Before, the reader took the sources a writer declared as the lender's own and counted a full rebuild of them as checked, so a leaked writer key could declare its own contract and pass. https://priors.trade/updates#cli-key-guard https://priors.trade/updates#cli-key-guard sdk security The v2 CLI refused a private key on the command line only when an argument was the key alone, so PRIORS_KEY=0x…, key:0x… or --invite=0x… got through. It now refuses 64 hex digits that are not part of a longer run, anywhere in an argument, before anything runs, and warns to rotate the key. A second Low fix lets the SDK's float read a pending settlement from x402's own payment-response header. https://priors.trade/updates#go-mode-polish https://priors.trade/updates#go-mode-polish app Later on 7 October, Go mode began showing money in dollars and cents everywhere, in one figure style. Home's hero no longer has Sign out, and Home shows the pool's figures, the balance and Add USDG once. Errors read as plain sentences, and the tips describe how pool v2 works. https://priors.trade/updates#history-paced https://priors.trade/updates#history-paced app Since 17:56 UTC on 7 October, History reads its old logs from the chain's official node alone. History and an agent's panel share any read made in the last 20 seconds, and a closed window, whose logs cannot change, is kept in the browser, so a later visit asks only for the newest one. Early on 8 October, History began reading one window at a time and waiting longer after a slow answer. https://priors.trade/updates#stock-vault-timelock https://priors.trade/updates#stock-vault-timelock contracts stocks security The stock vault is the one Priors contract that can be upgraded. Its upgrade key now belongs to the protocol's 48-hour timelock instead of the 2-of-3 Safe. Any upgrade has to be scheduled first, so anyone can read the new code for two days before it can run. https://priors.trade/updates#history-loads https://priors.trade/updates#history-loads app Since 6 October, the History tab, the list of agents an account received and an agent's own events had stopped loading. The chain had grown past the widest range of blocks the public node answers in one request. The account now reads it in smaller windows and asks each window again when a node gives a bad answer, so one slow reply no longer empties the page. https://priors.trade/updates#engines-first-step https://priors.trade/updates#engines-first-step contracts The calls the Safe scheduled on 4 October ran at 21:04 UTC, after their 48 hours on the timelock. The pool now belongs to PoolSteward, which holds it to a written policy, and every new loan uses the new fee split. What an agent pays does not change. https://priors.trade/updates#go-mode-guide https://priors.trade/updates#go-mode-guide app Go mode now has a Guide: how the app works, in plain words, in five languages. It sits at the foot of the sidebar, above Help. A contents list stays on the left as you read, and diagrams show the parts that are easier to see than to read. https://priors.trade/updates#attestation-v2 https://priors.trade/updates#attestation-v2 score The score Priors publishes to the ERC-8004 reputation registry used to point to a live page. Each new note now carries its own record inside it, fixed by its hash: the score and rung at a given block, the line the pool extends to the agent, its on-time repayments with the transactions that prove them, and the payment from the pool to the agent. It stays readable on chain even if the site goes away. https://priors.trade/updates#agent002-hire https://priors.trade/updates#agent002-hire app x402 agent002 is an open-source fleet of three worker agents that sell their time. On the new Hire page you pick the minutes (1 to 10), describe the task and pay from your own wallet: 0.10 USDG a minute over x402, or 25 $PRIORS a minute by a transfer checked on chain. The worker does the job with a language model and read-only Priors tools, and the result comes back with a receipt. https://priors.trade/updates#pt-usdg-go-mode https://priors.trade/updates#pt-usdg-go-mode app mcp sdk Go mode can buy PT-USDG with USDG, sell it before maturity and redeem it 1:1 for USDG from 25 March 2027, through Pendle's router, and Priors pays the gas. PT-USDG is Pendle's principal token for USDG on Robinhood Chain: held to maturity, it pays a fixed amount of USDG. agent001, Builder mode, the SDK and both MCP servers trade it with the same calls. https://priors.trade/updates#agent-card-tree https://priors.trade/updates#agent-card-tree app score In Go mode, an agent's card now opens with its tree: a voxel bonsai that grows with the agent's Score v2 rung, from a seedling at unproven to a tree in fruit at income-backed, and stands bare after a default. Next to it, the score out of 1000 and the five rungs, then the line, what it can borrow now, what it repaid and whether it was ever late. https://priors.trade/updates#engines-deployed https://priors.trade/updates#engines-deployed contracts Six contracts for the engines are on Robinhood Chain. None of them runs yet. The 2-of-3 Safe scheduled the first step through the protocol's 48-hour timelock, so anyone can read the calls before they run; they can be executed from 6 October, 21:04 UTC. When they do, part of what Priors earns starts to flow into the engines. The new seat vault comes after its external audit. https://priors.trade/updates#packages-0-5-0 https://priors.trade/updates#packages-0-5-0 sdk security Both packages are out in 0.5.0, with three security fixes that 0.2.11 also carries for anyone staying on the 0.2 line. npm now marks 0.2.0 to 0.2.10 deprecated, and the site hands out 0.5.0. https://priors.trade/updates#invite-bond-sale https://priors.trade/updates#invite-bond-sale security An agent's treasury line follows the agent, while its 5 USDG invite bond stays with the wallet that posted it. Sold with its line open, or with its invite still unused, the agent let a buyer borrow and default, and the seller's bond paid for it. No bond was exposed: every active bond is held by its agent's owner. https://priors.trade/updates#stockvault-settle-refund https://priors.trade/updates#stockvault-settle-refund stocks contracts security The 2-of-3 Safe upgraded the stock vault again. When the pool's last hook into the vault failed, the position was ended by settle, which never gave the line back to the vault's weekly budget, so whoever called it first kept up to $250 of room counted until the week rolled. No funds were at risk, and no position is open. https://priors.trade/updates#agent001-every-action https://priors.trade/updates#agent001-every-action app agent001 has its own tab in the sidebar now, and it can do every action in Go mode. Ask it to save, lend, back an agent or repay, and it shows the card for exactly that. Nothing moves until you press Approve. https://priors.trade/updates#go-mode-agent001 https://priors.trade/updates#go-mode-agent001 app Go mode has an agent001 tab. Pick one of your agents and see what it can borrow, when its next loan is due, its Score v2 and its wallet, then ask for a repayment, a borrow, a deposit to lend or a seat offer. Nothing moves until you press Approve. https://priors.trade/updates#ai-requests-wallet https://priors.trade/updates#ai-requests-wallet mcp app A borrow or a repayment your AI asks for through the Priors MCP, in Claude, ChatGPT or another MCP client, can now be confirmed with the wallet that owns the agent, in the agent console on priors.trade, as well as in Go mode. https://priors.trade/updates#go-mode-steps-seats https://priors.trade/updates#go-mode-steps-seats app Go mode shows its next steps one at a time, and you can move past a step and come back to it. The menu marks the tabs that need you. Home shows your $PRIORS, and Seats now lists the agents you can back, with what their backers received. https://priors.trade/updates#connect-your-ai https://priors.trade/updates#connect-your-ai mcp app Builder mode now starts with Connect your AI: pick Claude, ChatGPT, Codex, Claude Code, VS Code, Cursor or agent001, and get the one link or command that adds the hosted Priors MCP. In Claude, ChatGPT, VS Code and Cursor, Priors answers inside the chat with an app of its own, and your AI can ask to borrow or repay for your agent. You confirm each request in Go mode. https://priors.trade/updates#go-mode-gate https://priors.trade/updates#go-mode-gate app go.priors.trade now opens on a full-screen Google sign-in, and a sign-in always lands on Home. Every page's header has Join and Go mode, and the app's Stocks tab is now Backing: everything an owner can put behind an agent's line, in one place. https://priors.trade/updates#npm-0-2-10 https://priors.trade/updates#npm-0-2-10 sdk x402 mcp security Four private reports and one finding of our own review: the same multipart form could still be spelled as two purchases, and two sessions of one wallet could sign one purchase more than once. Both are fixed. https://priors.trade/updates#record-gate https://priors.trade/updates#record-gate x402 sdk mcp An x402 merchant can now read the payer's Priors record before it serves them, and refuse an agent that defaulted, ask for repaid loans, or charge less for a good record. A payment it refuses never reaches the facilitator, so nothing moves. https://priors.trade/updates#agent001 https://priors.trade/updates#agent001 sdk mcp x402 agent001 holds its own wallet, joins Priors, borrows and repays before the due date by itself, sells a service over x402, and talks from a terminal or Telegram. Its money moves go through @priors/mcp. It comes with a Priors skill for OpenClaw. https://priors.trade/updates#check-api https://priors.trade/updates#check-api api score A free API on priors.trade answers what an agent has actually repaid, by its agent id or by an address: an x402 payTo, a payer, a counterparty's wallet. No key, no account. And a badge for a page or a README. https://priors.trade/updates#erc8004-attest https://priors.trade/updates#erc8004-attest score contracts Each agent's Priors Score v2 is now on Robinhood Chain's ERC-8004 reputation registry, posted from one attester address that owns no agent. Any contract or app can read it there without asking Priors. https://priors.trade/updates#permit2-income https://priors.trade/updates#permit2-income score x402 Until now Score v2 read only x402 payments settled with EIP-3009. Payments settled through Permit2 (the upto scheme, and exact on a token without EIP-3009) now count the same way. https://priors.trade/updates#npm-0-2-7 https://priors.trade/updates#npm-0-2-7 sdk x402 mcp security A private report showed that 0.2.6's fix for "one purchase per form" missed multipart forms. 0.2.7 fixes it. https://priors.trade/updates#go-mode https://priors.trade/updates#go-mode app security Go mode is the Priors app. You sign in with Google, with no wallet to set up, and Priors pays the gas. The first people on the waitlist are in, and more come in waves. https://priors.trade/updates#two-step https://priors.trade/updates#two-step app security A Go mode account can turn on codes from an authenticator app. While it is on, a change of transfer address, a transfer out and every key export ask for a 6-digit code. https://priors.trade/updates#npm-0-2-6 https://priors.trade/updates#npm-0-2-6 sdk x402 mcp security After the private reports, Priors audited the public repo itself and found nine more issues in the packages, P-23 to P-31. 0.2.6 fixes all nine, and the site now hands it out. https://priors.trade/updates#sdk-cli-audit https://priors.trade/updates#sdk-cli-audit sdk security The same audit covered the SDK and the CLIs, findings C-3 to C-9. The fixes stop them from paying a stranger's loan, or approving USDG to another pool because of a .env. https://priors.trade/updates#npm-0-2-4 https://priors.trade/updates#npm-0-2-4 sdk x402 mcp security Two releases from private reports. They fix how the packages tell one purchase from another, and they count a borrow whose answer was lost. https://priors.trade/updates#treasury-cap https://priors.trade/updates#treasury-cap contracts The Safe raised the treasury's weekly limit on new first lines and raises from $25 to $100 at 08:55 UTC, after the change to two agents per wallet below. That is room for up to 20 first lines of $5 a week, as long as the treasury has free stake to back them. https://priors.trade/updates#stockvault-sv15 https://priors.trade/updates#stockvault-sv15 stocks contracts security The 2-of-3 Safe upgraded the stock vault for SV-15, a Low finding. A close requested while a loan was open never gave the line back to the vault's weekly budget, so four such cycles could fill the $1,000 cap with nothing open. No funds were at risk, and no position had been opened. https://priors.trade/updates#two-first-lines https://priors.trade/updates#two-first-lines security Each owner address can now get two automatic first lines from the treasury instead of one, in Go mode and Builder mode. Each line still needs its own 5 USDG bond, and the treasury's weekly limit on new lines is unchanged. https://priors.trade/updates#score-change-of-hands https://priors.trade/updates#score-change-of-hands score security Score v2 restarts an agent's record when the agent changes hands. It saw a change of hands only through the owners of v2 loans, so an agent sold after its v1 history kept that history. Found by Priors' own audit (S-2, Info). https://priors.trade/updates#growth-seats https://priors.trade/updates#growth-seats contracts sdk security An agent with 10 or more repaid loans can now get a $50 line with a seat of $PRIORS behind it, most often its owner's own. If the agent defaults, half the seat burns and the rest goes back to the staker. The vault's USDG backs every line in full, so lenders are never reached. https://priors.trade/updates#account-name https://priors.trade/updates#account-name security app The account pages no longer show the Google account you signed in with. Your Priors account gets a name of its own, drawn at random, and you can change it on your account page to any name no other account holds. https://priors.trade/updates#npm-stock-lines https://priors.trade/updates#npm-stock-lines sdk x402 mcp stocks The npm packages read the stock vault with no setup: the tokens it accepts, whether it lends on each right now, and the collateral behind an agent's stock line. https://priors.trade/updates#stock-lines https://priors.trade/updates#stock-lines stocks contracts sdk mcp security An agent can now borrow against Robinhood stock tokens. Its owner deposits one of 35 accepted tokens and the stock vault backs a line against it, valued by Chainlink. Loans on it are ordinary pool loans: same fee, same terms, same default rules. https://priors.trade/updates#score-v2-0-1 https://priors.trade/updates#score-v2-0-1 score stocks A loan backed by the agent's own stock is the agent's own money, so it doesn't count as risk someone else took on it. https://priors.trade/updates#score-v2 https://priors.trade/updates#score-v2 score x402 api mcp A second score beside the on-chain one. It counts only risk someone else took on an agent, and reads x402 income from the chain, whoever settled the payment. Every point comes with its reason. https://priors.trade/updates#seatsizer https://priors.trade/updates#seatsizer contracts SeatSizer now owns the seat vault. It keeps a $PRIORS seat worth about five lines on its own, from a day-long median, inside fixed bounds. https://priors.trade/updates#seatvault-v3 https://priors.trade/updates#seatvault-v3 contracts The vault's levers now reach seats that are already open, and a seat is bound to the owner who accepted it. https://priors.trade/updates#invite-bond https://priors.trade/updates#invite-bond contracts Post a refundable 5 USDG bond from the wallet that owns the agent, prove you own it, and the invite bot signs a treasury invite on the spot. https://priors.trade/updates#mcp-api https://priors.trade/updates#mcp-api x402 mcp api Any AI agent can read a Priors record over MCP with no key, or buy it per call over x402. https://priors.trade/updates#facilitator https://priors.trade/updates#facilitator x402 An x402 facilitator for USDG on Robinhood Chain. Merchants sign up themselves at x402.priors.trade. https://priors.trade/updates#npm-packages https://priors.trade/updates#npm-packages sdk x402 mcp Pay x402 in USDG from code, or run an MCP server that lets an agent pay, borrow and repay with its own wallet. https://priors.trade/updates#sdk-v2 https://priors.trade/updates#sdk-v2 sdk x402 A v2 client and CLI, and an x402 client that pays from the balance and borrows only the shortfall from the agent's line. https://priors.trade/updates#bounty-v2 https://priors.trade/updates#bounty-v2 security Critical $3,000, High $1,000, Medium $250, public credit below that. Every known v2 finding is listed with its test. https://priors.trade/updates#pool-v2 https://priors.trade/updates#pool-v2 contracts Every credit line is 100% backed by a backer's locked pool shares. A default burns them, principal and fee, so no path has been found for a loan loss to reach lender principal. That assumes the ERC-8004 registry, which its owner can upgrade, and USDG, an upgradeable token, keep working as they do today; the contracts have had no outside audit. https://priors.trade/updates#treasury-v4 https://priors.trade/updates#treasury-v4 contracts A treasury invite, a $PRIORS seat, or a backer who stakes USDG and vouches directly. https://priors.trade/updates#treasury-v3 https://priors.trade/updates#treasury-v3 contracts sdk Treasury v3 opens a first line only against an EIP-712 invite from a key the treasury's owner named. Registration stays permissionless. https://priors.trade/updates#bounty https://priors.trade/updates#bounty security BOUNTY.md: rewards for valid findings in the live contracts. https://priors.trade/updates#pool-reviewed https://priors.trade/updates#pool-reviewed contracts security CreditPool isn't upgradeable, so the review's fixes shipped as a new pool, and every agent's repayment history came with it. https://priors.trade/updates#sdk-reverts https://priors.trade/updates#sdk-reverts sdk The SDK asks the contract for fees, decodes all 34 custom errors, and simulates every write before it spends gas. https://priors.trade/updates#mainnet https://priors.trade/updates#mainnet contracts The credit pool goes live on mainnet: ERC-8004 agents borrow USDG against their repayment record. https://priors.trade/updates#sdk-failover https://priors.trade/updates#sdk-failover sdk RPC_URL takes a list of endpoints tried in order, and a transaction broadcast is never retried. https://priors.trade/updates#security-md https://priors.trade/updates#security-md security Private vulnerability reporting on GitHub. Every push runs forge fmt, build and test, npm test and the publish guard. https://priors.trade/updates#public-repo https://priors.trade/updates#public-repo contracts sdk Contracts, SDK, CLI and an agent skill. npm run quickstart walks a fresh agent through a loan and a score on a local chain.